How to Reset Service Brake System Light Silverado?

If you have a Chevy Silverado, then you may know that there is a service brake system light which is typically located in the instrument cluster, illuminates when there is an issue with the service brake system and when the truck needs to be serviced.

 

But what if this light comes on and you don’t know how to reset it? Don’t panic! There are a few things you can do to reset it and get your truck back up and running.

 

In this blog post, we’re going to you how to reset service brake system light Silverado, so you can get back to driving safely.

 

Why does the Service Brake System light come on a Silverado truck?

 

There are a few reasons why the Service Brake System light may come on in a Chevy Silverado truck. Some of them are given below:

 

The issue with the service brake system

 

The service brake system is responsible for the truck’s ability to stop. When there is an issue with this system, it can cause the truck to not stop as effectively, which is why the light comes on.

 

Truck needs to be serviced

 

The light will also come on when the truck needs to be serviced. This could be for several reasons, such as the brake pads need to be replaced or the brake fluid needs to be flushed and replaced.

 

Incorrect brake fluid level

 

If the brake fluid level is incorrect, it can cause the light to come on. This is because the wrong level of fluid can make it difficult for the truck to stop.

 

Air in the brake lines

 

If there is air in the brake lines, it can make it difficult for the truck to stop. This is because the air can compress, which makes it harder for the truck to stop.

 

Broken brake pad

 

If a brake pad is broken or worn, it can cause the light to come on. This is because the broken pad can cause the truck to not stop as effectively.

 

Faulty brake caliper

 

When the brake caliper is not working properly, it can cause the light to come on. This is because the caliper is responsible for applying pressure to the brake pads, and if it’s not working properly, it can make it difficult for the truck to stop.

 

Bad brake rotor

 

If the brake rotor is damaged, it can cause the light to come on. This is because the rotor is responsible for the truck’s ability to stop, and if it’s damaged, it can make it difficult for the truck to stop.

 

How do you know when the Service Brake System light needs to be reset?

 

There are a few different ways to know when the Service Brake System light needs to be reset. One way is if the light comes on and starts flashing.

 

This typically means that there is an issue with the service brake system and the truck needs to be serviced. Another way to know is if the light comes on and stays solid. This usually means that the light needs to be reset.

 

What to do if the light keeps coming on after you’ve reset it?

 

If the light keeps coming on after you’ve reset it, then there may be an underlying issue with the service brake system itself. In this case, you’ll need to take your truck to a certified dealership to have it looked at. They will be able to diagnose the problem and let you know if it needs to be repaired or replaced.

 

How to reset the Service Brake System light on a Chevy Silverado truck?

 

If the service brake system light on your Chevy Silverado truck comes on, don’t worry! There are a few things you can do to reset it.

 

1. Disconnect the battery

 

One way to reset the light is by disconnecting the battery. To do this, locate the negative (-) and positive (+) terminals on the battery and use a wrench to loosen the terminal nuts. Once the nuts are loose, pull the terminals off the battery and wait for about 5 minutes before reconnecting them. This should reset the light.

 

2. Check the service brake fluid level

 

Another way to reset the light is by checking the brake fluid level and adding more fluid if necessary. To do this, locate the brake fluid reservoir under the hood of the truck and remove the cap. Check the level of the fluid and add more if necessary. Once the level is topped off, replace the cap and start the truck. The light should be reset.

 

3. Check for leaks

 

If there are no leaks, then the next thing you’ll want to do is check for leaks in the system. If there are any, then they will need to be repaired before the light will go off.

 

3. Bleed the service brake system

 

In case of no leaks, then you’ll need to bleed the service brake system. This can be done by a professional, or you can follow the instructions in your Silverado’s owner’s manual.

 

4. Replace the service brake light bulb

 

If the light is still on after following these steps, then you may need to replace the service brake light bulb.

 

5. Get a service manual

 

If you want to try to diagnose and reset the light yourself, then you may need to get a service manual for your truck. This will provide you with detailed instructions on how to troubleshoot and reset the light.

 

If your Silverado truck has been in an accident, will this affect the Service Brake System light being on or off?

 

Yes, if your Silverado has been in an accident, this can affect the service brake system light. After an accident, it’s important to have your truck checked out to make sure that everything is working correctly. This includes the service brake system. If there is an issue with the system, the light will remain on until it is fixed.

 

FAQ’s

 

1. What does it mean when my Chevy says service brake system?

 

Is your brake service light coming on each time you press the pedal? This could indicate a hydraulic issue on one side of your vehicle, or an alarmingly low level of brake fluid in the master cylinder – so don’t delay getting it checked out.

 

2. How do I reset my service brake light?

 

Make sure to insert your key (or key fob) into the ignition and move it to position two. Once that’s done, open up the driver’s door and wait 10 seconds. You’ll have successfully reset those pesky brake pad lights in no time.

 

3. What causes service brake light to come on?

 

When the brake light illuminates on your dashboard, it’s indicative of two possible issues. It may mean that some sort of maintenance is needed – like topping up your hydraulic fluid or releasing the parking brake. The brakes are powered by a system comprised of many parts working together; namely lines and tubes filled with specially formulated oil to keep them running smoothly.

 

4. Can you drive with service parking brake light on?

 

That glowing wrench on the dashboard could be saying it’s time to get those brakes in tip-top shape. Not just for your own safety, but also that of other drivers around you – having a good set of functioning brakes is never something to take lightly. You can still drive the truck, but have them serviced by an experienced auto mechanic as soon as possible.

 

Final Verdict how to reset service brake system light Silverado

 

Light on service brake system comes because of many reasons some of them are faulty brakes, bad rotor, and improper functioning of the caliper. You can reset the light by disconnecting the battery, checking for leaks, and bleeding the system.

 

You should replace the service brake light bulb if necessary. You can get a service manual for your truck to try to diagnose the light yourself. Hence in this guide, we have not only explained the causes of this problem but also suggested some ways to reset the service brake system light on Chevy Silverado.

 

If you have any further queries related to this guide or resetting the light, then please feel free to ask us in the comment section below. We will surely try to help you out.