How To Keep Car Seat Covers From Sliding?

Car seat covers allow you to prevent dirt, dust, crumbs, spills, stains, and other debris from reaching and damaging the original upholstery of your car seats.

 

But one of the most annoying things about using car seat covers is that, at some point or another, they will start sliding.

 

No matter how much you love your seat covers, there’s nothing worse than covers sliding up and down. If you’re tired of your car seat covers sliding around, you have come to the right place.

 

In this article, we’ll discuss what causes seat covers to slide on car seats. Plus, we’ll also explain different methods you can use to stop your car seat covers from sliding.

 

What Causes Seat Covers to Slide?

 

Here’s a list of the main factors that cause your car seat covers to slide:

 

Material Of the Seat Covers

 

Most car seat covers are made from a flexible material that stretches to fit your car seat, which allows them to start sliding up and down easily.

 

In addition, if the seat cover fabric is too thin, it won’t hold the weight of the passenger properly and will start to slide. In such a case, you’ll need to use car seats with a different material.

 

Improper Fitting

 

One of the first things you should do is make sure your seat covers fit correctly. If they are too loose, they will slide easily. You’ll need to choose seat covers specially designed for your car to prevent this problem.

 

Outside Temperature

 

The temperature of the environment can also have an impact on how your car seat covers slide. If it’s too hot outside, the car seat cover will be harder to slide. If it’s too cold outside, the seat cover will be easier to slide.

 

It happens because certain materials, such as leather, used to make original car upholstery, become hard during cold weather and soft during high temperatures. The harder the original upholstery, the more the seat cover will slide, and vice versa.

 

How Can You Stop Your Seat Covers from Sliding?

 

Car seat covers make for a great way to protect your seats but one of their drawbacks is that they tend to scrunch, sliding up from their fastenings, and this doesn’t look good.

 

Luckily, you can combat this problem easily. Here’s a list of a few tips and tricks to prevent just such a problem.

 

High-Quality Material

 

It’s important to use car seat covers made from a material that is strong enough to hold the weight of the passenger. In addition, the material should also have a non-slippery design so that it can prevent the seat covers from sliding.

 

For example, you can install leather seat covers to solve the sliding problem. These covers have a better lifespan than most other types of car seat covers and it’s also easy to clean them.

 

You can easily find tons of manufacturers available in the market that offer high-quality leather seat covers and you just need to pick one of them up. You can also use waterproof seat covers such as the waterproof Jeep Wrangler seat covers.

 

While looking for new seat covers make sure that you choose something that comes with adjustable straps and buckles so that you can adjust them easily.

 

Right size and Proper Fastening

 

Use seat covers that are tight enough to fit the car seat. If they are too tight, you’ll have a hard time sliding them down. Whereas, if you install seat covers too loose, they’ll continue to slide.

 

So, you should ensure that the seat covers are of the right size and fastened securely. To ensure that the seat covers are fastened securely, you can adjust the fit of your seat covers by using the straps attached to the covers. 

 

The easiest way to adjust the fit of your seat covers is to loosen the straps. Once the straps are loose, you can pull the seat covers up and down to adjust them properly and then tighten the straps again.

 

Shelf Liner

 

You can attach a shelf liner beneath the covers of all seats in your vehicle. The shelf liner has a rubbery construction, allowing it to make a tie with covers and seats. It will remove slipperiness and keep your seat covers in place.

 

Removable Fasteners

 

You can use removable fastenings to prevent your seat covers from sliding. The most common fastening for this purpose is Velcro, but there are other options as well. 

 

For example, you can use zippers or snaps to fasten the seat covers. Removable fasteners even allow you to make universal car seat covers fit better.

 

Inspect Your Car Seat Covers

 

In addition to using the techniques discussed above, it’s a good idea to inspect your car seat covers regularly. It’ll allow you to adjust them if they have started sliding.

 

What are some alternatives to car seat covers that won’t slide?

What Are Some Alternatives to Car Seat Covers That Won’t Slide?

The following are two alternatives to car seat covers that won’t slide.

 

Consider Using a Seat Belt

 

If you’re looking for an alternative to car seat covers, you should consider using a seat belt. Seat belts are designed to keep you and other passengers safe. However, seat belts do not come with the same advantages as car seat covers.

 

For example, if you have leather seats in your car and the material has become hard, you won’t be able to sit on the seat firmly. You’ll feel like your entire body is sliding, especially on turns. So, a better strategy is to use seat belts in conjunction with a car seat.

 

Use Universal Bucket Seats

 

You can also use universal bucket seats to solve the sliding problem. Universal bucket seats are made to be used with car seats. They are specially designed with high-quality upholstery that keeps your body in place.

 

Related Article – Are Seat Covers Worth It

 

FAQs About How to Keep Car Seat Covers from Sliding

 

Q: What is the Best Method to Keep Car Seat Covers from Sliding?

 

The best method to prevent car seat covers from sliding is to use non-slippery and high-quality seat covers that grip the car’s seats firmly. The grippy material of these covers will help them stay in place.

 

Q: What Car Seat Covers Should You Use to Avoid the Sliding Problem?

 

There are different types of car seat cover available in the market that you can use for your vehicle. You want to choose grippy seat covers made of friction-resistant and non-slippery material. You can go with leather seat covers for this purpose. While these covers will cost you more money, they’re worth the price because of the benefits they offer.

 

Q: Can All Seat Covers Fit My Car?

 

No, all seat covers can’t fit your car seats. While universal seat covers are available they don’t make the best option when it comes to preventing the sliding problem. Therefore, you should choose seat covers that are specially designed for the car you have. Otherwise, you’ll likely end up with too loose or too tight seat covers.

 

Final Words

 

When it comes to choosing car seat covers you must ensure that you get high-quality material that is simple to use and provide the comfort you require. You should look for car seat covers that are specially designed for your car so that it perfectly fits the seat you are using.

 

Here in this article, we have discussed the factors that cause car seat covers to slide and also suggested ways to prevent the slipping of car seats.

 

We hope this information has helped you to make the right choice when it comes to purchasing car seat covers to solve the sliding problem. If you have any questions, feel free to ask in the comment section below.