How to Reset Transfer Case Control Module

If you own a Chevy Silverado, then you know that it is important to keep the transfer case control module working properly. But if you ever found a transfer case control module that goes out, don’t worry! You can reset it yourself, without having to take your truck to the mechanic.

 

In this article, we’ll not only walk you through the causes of improper working of the transfer case control module but will also explain the process of how to reset transfer case control module.

 

So if your truck is acting up and you’re not sure what’s wrong, read on for instructions on how to fix it yourself.

 

Why does the transfer case module stop working?

There are a few reasons why the transfer case control module might stop working.

 

Power Surge:

 

One reason why the module might stop working is because of a power surge. This can happen if there is a power outage or if the battery dies and is replaced. When the power comes back on, it can cause a surge that damages the module.

 

Wiring Problem:

 

Another reason why the module might stop working is because of a wiring problem. This can happen if the wires that connect the module to the transfer case are loose or damaged.

 

Module Failure:

 

The module can also simply fail over time. This is usually due to wear and tear, and it is not always possible to prevent it.

 

Water Damage:

 

It can also stop working if it gets wet. This can happen if the truck is driven in the rain or if water somehow gets into the module.

 

Physical Damage:

 

The module can stop working if it is physically damaged. This can happen if the module is dropped or hit.

 

Temperature Change:

 

Finally, the module can stop working if it is exposed to extreme temperatures. This can happen if the truck is driven in hot or cold weather.

 

Related Article – How to Reset Transfer Case Control Module Silverado

 

Why should we know how to reset transfer case control module in the first place?

 

The transfer case control module is responsible for controlling the transfer case, which is the part of the truck that helps to shift gears.

 

If the transfer case control module goes out, it can cause the truck to have difficulty shifting gears, or even stall. So it’s important to keep the module in a proper working condition.

 

How to identify if the module needs to be reset?

 

Following are the signs that tell the module may need to be reset include:

 

• The check engine light is on: When the module fails, the check engine light will come on. It is a good idea to have a professional service your truck right away.

 

• In case the 4WD system is not working properly: If the 4WD system is not working, the 4WD light will come on. This is a sign that the module needs to be reset.

 

• The transfer case is making strange noises: If the module makes a strange noise when you start the truck, then this is another sign that something is wrong.

 

• When the truck is not shifting properly: when the transfer case control module has a defect it might cause the truck to not shift properly.

 

• The module is getting hot to the touch: It is a sign that the module needs to be reset if the module is getting hot to the touch.

 

• A burning smell coming from the module: The burning smell indicates something wrong with the transfer case control module that needs to be addressed.

 

How often the module should be checked to ensure it is working properly?

 

The module should be checked at least once every three months. If you notice any discrepancies, make sure to take your truck to the mechanic so they can properly fix the issue.

 

What to do if the transfer case control module isn’t working properly?

 

If your transfer case control module has stopped working, don’t worry! You can reset it yourself, without having to take your truck to the mechanic.

 

Here’s what you’ll need to do:

 

1. Start by disconnecting the battery: This will help to prevent any further damage to the module. It will also ensure that no power is going to the transfer case control module.

 

2. Next, remove the module from the transfer case: There will be four bolts holding it in place. Use a socket wrench to remove them. You’ll also need a screwdriver to do this.

 

3. Take the module apart: Once you have the module removed from the transfer case, you’ll need to take it apart. This is usually just a matter of unscrewing a few screws.

 

4. Dry the module: If the module is wet, you’ll need to dry it off. The best way to do this is to use a hair dryer.

 

5. Put the module back together: Once the module is dry, you can put it back together.

 

6. Reconnect the battery: Finally, reconnect the battery and turn on the truck. The module should now be reset and working properly.

 

If you follow these steps, you should be able to reset the transfer case control module on your Silverado. This will fix any problems that you’re having with your truck and help to keep it running smoothly.

 

What are the consequences of not resetting the module?

 

If you don’t reset the module, your truck may have issues with its 4WD system. If the module is not functioning properly, it could cause your truck to get stuck in 4WD mode and not be able to shift into 2WD.

 

Additionally, if the module is not reset, it could cause your truck to have difficulty shifting gears, or experience other transmission problems.

 

Final Verdict:

 

The transfer case control module of Silverado might stop working because of different reasons. It includes the check engine light is on, the transfer case is making strange noises, the truck is not shifting properly, the module getting hot to the touch, and a burning smell coming from the module.

 

If any of these signs show up, it is recommended to reset the module. The process of resetting is simple you just have to follow some steps that are mentioned above.

 

Not resetting the module might cause the truck to get stuck in 4WD mode and not be able to shift into 2WD. Additionally, it could also cause your truck to have difficulty shifting gears, or experience other transmission problems.

 

So, it is always better to reset the module on time to avoid any further damage. We hope this article helped explain the importance of resetting the transfer case control module in your Silverado. Thanks for reading!