How to Reset Speedometer on Chevy Silverado

This article contains affiliate links. When you make a purchase, we may receive a small commission without any additional cost to you. Read more

A Chevy Silverado is one of the finest trucks you can buy. However, like every other vehicle on the road. Knowing how to reset the speedometer on chevy Silverado is important for understanding and maintaining your pickup truck.

The speedometer on your Chevy Silverado is a crucial instrument that tells you how fast your truck is going. Therefore, it’s important to know what the various gauges tell you, including the speedometer. A speedometer that isn’t working properly could prevent you from getting up to highway speeds, and it could even lead to a ticket if there’s an issue with it in use.

The speedometer is attached to the transmission, so you must know how to change its reading when after you’ve installed a new gearbox or transmission. It’s also important that you get this done before taking your truck for an inspection, as there are strict regulations in place to ensure the accuracy of speedometers.

If you’re looking for a way to reset your Silverado’s speedometer, there are several ways it can be done.

See this guide for more information about how to Reset Speedometer on Chevy Silverado.

How to Reset Speedometer on Chevy Silverado? Step by Step Guide

Driving your Chevy Silverado comes with certain responsibilities, including knowing how to change the speedometer when there’s been an alteration in transmission gearboxes or other systems. While you can have a professional deal with it, resetting the speedometer on your Silverado yourself is possible, and you’ll save yourself money in the long run.

Here is a step-by-step guide on how to reset your Silverado’s speedometer.

Step 1: Removing the Cover

The first thing you will need to do is remove the cover and expose your Silverado’s transmission. There are a few ways to do this, including using your headlight or a flashlight, but the easiest way is to undo the screws on either side of the panel with an 8mm wrench.

Step 2: Pull the speedometer unit

Now you need to pull the speedometer unit out. It’s quite a sturdy mechanism, so be firm when doing this. Once it comes loose, you will need to disconnect the cables by pulling them out of their clips and moving them away from the transmission.

Pull gently on the brackets holding the glass onto the speedometer until the glass comes off.

Step 3: Remove the Glass

You now need to remove the glass from the speedometer. This is done by simply pulling it off gently. If you’re dealing with a new Silverado, you may not find the glass on there as they are normally replaced with a plastic cover.

Step 4: Bring the Needle to Zero

With the help of a hand, you can now bring the needle to zero. If it’s not stuck, this should be an easy job for you.

Step 5: Putting it All Back Together

After you’ve finished resetting your speedometer, it’s time to put everything back together again. Before you do so, though, you will need to reconnect the cable and also replace the glass.

You should now have a fully functioning speedometer that’s ready to be used.

How to Reset Computer on Chevy Silverado

How to Reset Speedometer on Chevy Silverado

The computer on a Chevy Silverado is what makes the truck functional and allows you to drive it safely. There are several reasons why you might want to reset the computer. If you’re looking for a way to do that, there are many ways you can perform this action.

Here is a step by step guide on how to reset your computer on your Silverado:

Step 1: Locate the Computer

The first thing you will need to do is locate the computer, which should be under the driver’s side of the dash. To do so, you will need to remove a few components, such as the glove box and air conditioning unit.

Step 2: Disconnecting Wires

With your Silverado dashboard exposed, you will then need to disconnect all of the wires going into it from underneath. The best way to do this is to remove the relay.

Step 3: Unscrewing the Computer

With all of the wires disconnected, you will then need to unscrew your Silverado’s computer with a wrench and remove the chip in it. This is done by simply turning it counter-clockwise until it comes loose.

Step 4: Resetting the Computer

Now you can reset the computer by holding down the “Reset” button while plugging in a set of jumper cables to the chip. Once you’ve done this, follow the LED lights to reset the computer. This may take a little bit of time, depending on your specific model of Silverado.

Step 5: Replacing the Chip

Now you can replace the chip and wrench it down to its original position. Place the relay back into its socket, and you’re on your way to having a reset computer.


We hope that our guide has helped you find the information and resources you were looking for if you’ve come this far.

We also hope that your Chevy Silverado is running smoothly now!

As always, if there are any questions or concerns about anything at all, please don’t hesitate to contact us. We’ll be happy to answer them in the comments below!

Thank you so much for reading – see ya next time!

Leave a Comment