How To Make Exhaust Louder?

This article contains affiliate links. When you make a purchase, we may receive a small commission without any additional cost to you. Read more

If you’re looking for some ideas on how to make your exhaust louder, then you’ve come to the right place! This article will walk you through multiple methods on how you can make your exhaust sound better and louder. We’ll go over some of the most effective ways to do this without having to break the bank.

Your engine’s exhaust system is one of the best ways you can improve your vehicle’s performance. Not only will it make you more noticeable to other drivers, but you’ll also have the added bonus of your car sounding a whole lot better.

Today we’re going to be talking about a few different ways How To Make Exhaust Louder?

10 Methods To Make Exhaust Louder (Some of the most effective ways to get louder exhaust!)

There are 10 different methods, each one is effective in its own right:

  • Increased Mesh Port Area
  • Custom End Pipes
  • Increasing Exhaust Effectiveness on all RPMs
  • Replacing The Muffler
  • Connecting Welder Hangers To Your Exhaust
  • Install Headers
  • Increasing The Bore
  • Unclogging Exhaust Tubing
  • Hole In The Exhaust
  • Catback Exhaust

1. Increased Mesh Port Area

If you’re looking for an easy way to get louder exhaust without doing a lot of work, then this is a good decision for you. This method is especially good for those who have a factory exhaust system.

One of the most effective ways to get louder exhaust for your vehicle is by increasing the port area or the internal diameter of the exhaust tubing. This will allow for better airflow through your exhaust system, giving you more power when you need it. 

If you decide to use this method, then you might want to cut out a portion of the exhaust pipe, weld in the mesh and then weld the exhaust pipe back together.

2. Custom End Pipes

If you’re looking for a more permanent way to get the louder exhaust, then you might want to consider custom end pipes. These pipes are designed to increase the exhaust effectiveness on all RPMs, making your vehicle sound louder at all speeds. 

To install custom end pipes, you’ll first need to remove your factory exhaust system and replace it with the new pipes. Once you have the new pipes installed, you’ll need to weld on the ends of the pipes and then connect them to the mufflers.

3. Increasing Exhaust Effectiveness on all RPMs

Another method for getting a louder exhaust system is to increase the amount of air that’s being funneled through your muffler. By increasing this, you’ll be able to add more power and make it sound much better regardless of speed or RPMs. 

This can be achieved by installing large end pipes on each side with larger diameter pipes feeding into at least one pipe that exits out in front underneath the vehicle.

4. Replacing The Muffler

The muffler on a cat-back exhaust system is an important piece of the whole design and effect. Replacing it will not only impact how loud your vehicle sounds, but also its overall performance levels like increased torque and power delivery range. 

A well-designed one can be replaced by simply cutting out the old resonator housing with hand sewing. It’s highly recommended to use fiberglass repair tape for wrapping around the new component to avoid any leaks or rattles.

5. Connecting Welder Hangers To Your Exhaust

A common way to get a custom-vehicle-style exhaust is by using welders hangers on the muffler tips. Welder hangers are usually heated lamps with an attached clamp that fits through holes in your exhaust system and holds it securely. 

Taking this approach opens up some awesome design possibilities like getting a unique angle for each application, or changing out the position of where you’re running direct pipes off of (sub/front or mid/rear).

6. Install Headers

Headers are an essential piece of a well-designed exhaust system. They help to funnel the exhaust gases upwards and out of the vehicle, and they also help to increase the exhaust’s volume. By installing headers, you can increase the overall performance of your vehicle by increasing the torque and power delivery range.

7. Increasing The Bore:

Increasing the bore of your exhaust system can also help to increase the performance of your vehicle. By increasing the size of the exhaust pipe, you can increase the airflow and pressure inside the pipe. 

This increase in pressure can help to increase the performance of your engine by increasing the amount of air that can be burned.

There are a few different ways to increase the bore of your exhaust system. One way is to use a larger muffler. Mufflers are usually made out of stainless steel, aluminum, or titanium, and they can increase the size of the exhaust pipe by up to 3 inches. 

Another way to increase the bore of your exhaust system is to use a turbocharger. Turbos are specially designed engines that use a compressor to increase the air pressure inside the engine. This increased pressure can help to increase the performance of your engine by increasing the amount of air that can be burned.

8. Unclogging Exhaust Tubing:

In order to maintain the performance of your vehicle, it’s important to clean out your exhaust system. The clog can be caused by various things, but it usually comes from debris or foreign matter that’s getting trapped inside the exhaust system. 

If your vehicle has been sitting for a while, the inside of the exhaust system can get full of dirt and debris. This can cause your exhaust system to clog, which can lower the performance of your vehicle.

In order to keep your vehicle running at its peak performance, it’s important to clean out your exhaust system. You can do this by using a vacuum hose and a canister vacuum. This is a great way to clean out any debris that’s getting trapped inside your exhaust system.

9. Hole In The Exhaust

Vehicles benefit greatly from this method of increasing the sound of their exhaust systems.

According to this theory, if your exhaust system’s muffler has any leaks or holes, the exhaust will be able to escape since it won’t be dampened by any pipes, mufflers, or catalytic converters, so this is one of the best and cheapest methods to increase the sound of your exhaust system.

10. Catback Exhaust

This is another popular and affordable way to increase the sound of your exhaust system. This system is made up of a number of pipes that are connected to your original exhaust system. The sound that comes out of this system is much louder and clearer than the original exhaust. 

This system is also very popular because it doesn’t require any modifications to your vehicle, so you can install it without any problems.

exhaust close up

Why do you need to increase exhaust volume on your car?

A louder exhaust system is great because it can add to the overall look of your vehicle. For example, if you have a sports car, a louder exhaust system can make it look faster than it already is. In addition, a louder exhaust system can give your vehicle a unique sound that can set it apart from others. A louder exhaust system can be good for your vehicle’s performance because it can make your vehicle much lighter. A lighter vehicle will accelerate faster in comparison to a heavier vehicle.

In this case, a louder exhaust system can be a great way to increase your vehicle’s performance.

How to make your exhaust louder for cheap?

There are a few different ways that you can make your exhaust louder for a cheap price. One way is to install a cat-back exhaust system. This system is made up of a number of pipes that are connected to your original exhaust system. 

The sound that comes out of this system is much louder and clearer than the original exhaust. This system is also very popular because it doesn’t require any modifications to your vehicle, so you can install it without any problems.

Another way to make your exhaust louder for a cheap price is to install a loud muffler. A loud muffler is a type of exhaust system that is designed to increase the sound of your vehicle’s exhaust. This system is typically made up of a number of pipes that are clamped together. This system is very popular because it provides a very loud and clear sound.

Finally, you can also install a louder exhaust system by installing a racing exhaust system. This system is designed for use in racing cars and is typically made up of a number of pipes that are very thin. This system is very popular because it provides a very loud and clear sound.

Conclusion:

Increasing the sound of your exhaust system can be done in a number of different ways. This includes modifying your original exhaust system, installing a louder muffler, or installing a louder exhaust system. All of these methods are affordable and easy to install.

The right exhaust system can greatly increase the sound of your vehicle. It can also improve the look of your vehicle and can increase its performance.

We hope that this article has answered all of your questions about how to increase the sound of your exhaust system. We would love to hear from you in the comments section below.

If you have any questions, please feel free to contact us.

Leave a Comment