7 Best Shocks for Silverado 1500 4wd

This article contains affiliate links. When you make a purchase, we may receive a small commission without any additional cost to you. Read more

The Best Shocks for Silverado 1500 4wd makes the wheel be absorbed by a gas generator. It also helps you control your car’s stability and comfort when turning, braking, or going over bumps.

The shocks for Silverado 1500 should be high quality and designed to fit your specific needs. The best shocks must give your vehicle the best ride quality during its life cycle, from everyday driving to any type of off-road activity.

I think that the best shocks should be considered as an investment for your vehicle which will make it safer and more comfortable to drive, but also will increase the value of your car, even if you decide to sell it.

These shock absorbers are responsible for absorbing heat energy from inside the cylinders, so they won’t crack from too much heat.

Our Top Picks for Best Shocks for Silverado 1500 4wd

Last update on 2022-05-20 / Affiliate links / Images from Amazon Product Advertising API

The best shocks will also protect your wheel rims from becoming dirty and potentially damaged when the road surface is not clean.

There are a variety of products relevant to the Shocks for Silverado 1500 4×4. Based upon our working we have selected our top 5 picks whose detailed descriptions is given below:

1. TBilstein 5100 Monotube Gas Shocksitle

Bilstein 5100 Monotube Gas Shocks Set for 99-06 Silverado 1500 4WD

Key Features

  • Smooth Exterior
  • Limited Lifetime Warranty
  • Best performance for on and off-road

Replacement shocks for your Chevy Silverado that will give you a smooth and safe ride. The Bilstein 5100 Monotube Gas Shocks Set provides replacement gas shocks and struts for your 1999-2006 Silverado 1500 4×4 with torsion bar suspension.

These provide optimal handling and comfort by dampening road bumps while keeping the truck level throughout turns or during braking to ensure optimum safety on any terrain.

These Best Shocks for Silverado 1500 4wd were designed for the front and rear of a Silverado equipped with torsion bars to reduce body roll and provide the best possible performance.

This shocks set is a great upgrade for your truck, whether you tow or go off-road. The shocks are specifically designed to handle any load and can be used with torsion bars as well as leaf springs upfront.

When you get your new shocks, be sure to install them with the front and rear in pairs. This will ensure that all four shock absorbers are working equally hard so there is no unbalanced pressure on one side which can cause damage over time.

Expect two front and two rear shock absorbers for your vehicle. They are meant to work with small suspension modifications, such as a 2″ lift in the front or back of your car.

These shocks will not fit on any vehicles that have been lifted more than 4 inches from stock height and are compatible with Silverado 1500HD.

This shock is specifically made for 4WD vehicles and includes everything you need to install it, but it is quite a complicated task.

You are encouraged to reuse the factory bolts, if possible when installing this product – otherwise included washers will work fine too.

It also offers a lot more flexibility than other products because it offers different mounting plates that can go with the shocks as well.

Have you been looking for a gas shock set that will last long and provide great performance? Well, it’s your lucky day as you come across this product.

These shocks can never disappoint not only because they come at an affordable price but also because of their limited lifetime warranty which is hard to find in other products like these.


  • Smooth and Safe Ride
  • Optimum Safety
  • Able to Handle any Load
  • Affordable Price
  • Limited Lifetime Warranty


  • Compatible with Silverado 1500HD only
  • Difficult installing procedure

2. Rancho Quicklift Leveling Struts Pair

Rancho Quicklift Leveling Struts

Key Features

  • Painted Exterior
  • Rancho’s 90-day ride guarantee
  • Smooth ride with 9 different settings

Now you can raise your 2007-2015 Chevrolet Silverado 1500 4WD with Rancho’s Quicklift Leveling Struts Pair.

These custom-fit parts are a great solution for lifted trucks that have factory wheels but need to be leveled out after the lift has been installed, or if it just needs some more clearance due to larger tires.

The included new upper strut mounts will also replace any worn OEM units at each corner of the truck/SUV while creating additional ground clearance from previous installations using lower rubber pads instead of metal blocks in these locations during installation on most vehicles.

For the driver who wants to level out their Silverado, these Best Shocks for Silverado 1500 4×4 are an excellent choice. They will provide a more comfortable ride no matter what terrain you’re tackling.

The right set of leveling struts can make all the difference when it comes to getting around in your Chevy truck – but if you haven’t done any research on this subject before now, narrowing down which ones work best for your vehicle might feel like trying to find needles in haystacks.

But these struts make your job easier because they provide all the features a truck driver is looking for.

However, these struts have been factory adjusted for vehicles with no lift or a small 2-inch lift. The part is only sold in pairs and will not fit the Silverado/Sierra 1500 models, although it works with both 4-wheel drive (4WD) & two-wheel drives(2WD).

These struts are best suited for XC and trail riding, featuring 9 different settings of compression and dampening adjustment to match any ground you’re confronting.

The front height isn’t adjustable from a specified height like most forks are. It can either be set at 200 or 300mm high depending on what works better for your bike geometry.

If you purchase Rancho shocks, they will be covered for 90 days and if the ride quality degrades or your product fails prematurely during that time then it is guaranteed to be free of charge.


  • Custom Fit Parts
  • Comfortable Ride
  • 9 Different Settings
  • Easy to Install
  • 90-Days Warranty


  • Factory adjusted for vehicles with no lift
  • Add substantial weight to your automobile.

3. Bilstein Shock Absorber

Bilstein (24-186940) 5100 Series Shock Absorber

Key Features

  • Zinc Exterior
  • Durable construction
  • Lifetime Warranty

The Bilstein 5100 Series Shock Absorber is designed to provide a smooth and comfortable ride. These extended length shocks are perfect for heavy-duty applications and can be installed front or rear on most cars, trucks & vans with the included coil spring spacers.

These Best Shocks for Silverado 1500 4wd are ideal for pickup truck owners who regularly tow cargo of all types including boats, small trailers, etc.

Those interested in improving vehicle handling at high speeds by reducing body roll during cornering maneuvers – especially if you spend long hours driving your rig over rough terrain day after day, also prefer these adjustable gas pressure shocks.

These shocks have been designed to provide excellent handling and control in almost any condition, from light off-roading up to everyday driving on city streets.

This product has super damping capabilities and features the company’s innovative digressive valving technology to provide excellent control over body roll on steep grades as well as smooth highway rides.

These shocks are among the best of their kind in terms of quality and durability because they offer superior convenience with additional options such as seat riser kits which allow users to adjust their vehicle’s driver or passenger seats up two inches higher than normal without having any impact on the handling during turns.

This shock absorber package is made of durable zinc-plated steel and will last a long time. The package weighs 3.357 kilograms, with an elegant yet corrosion-resistant finish that enhances its endurance.

The product’s construction consists of high-quality materials, offering you lasting durability in the face of wear or tears from outdoor conditions such as rain and snowfall.

These shocks have dimensions of 68.453cm x 10.414cm x 10.414m and are vehicle specific for a perfect fit that reduces vibrations while driving down the road to ensure you arrive at your destination in comfort, free from fatigue or discomfort due to bumps along the way.

Truck drivers avoid spending money on expensive features, so despite all the amazing things these shocks can do they are not very popular.


  • Smooth and Comfortable Ride
  • Excellent Handling and Control
  • Made of Corrosion Resistant Zinc Plated Steel
  • Lasting Durability


  • Expensive

4. Bilstein 4600 Series Shock Absorbers for z71

Bilstein 4600 Series Shock Absorbers For Chevy Silverado

Key Features

  • Painted Exterior
  • More control and stability with monotube gas pressure technology
  • Easy to Install
  • Lifetime Warranty

Shock Absorbers are an essential part of the vehicle suspension. Installing Bilstein 4600 Series Shock Absorbers for Chevy Silverado 1500 4WD is the dream of most truck drivers.

This will improve your truck’s performance and enhance safety on the road by providing a slick, relaxing ride in any weather condition while also reducing fatigue and improving handling.

These Shocks for Chevy Silverado 1500 keep your vehicles safe when you drive them over bumpy roads or through rough terrain; they absorb impact forces to reduce vibration transmitted from wheel wells to cabins.

The Series Shock Absorbers include front shocks and rear shocks. They are an excellent replacement if you want to upgrade the shocks on your vehicle or fix any of its issues.

The product is exclusively made for those who enjoy the feel of a vehicle without an electronic suspension system, which excludes this category from the list of compatible vehicles. These shocks will give you that smooth ride quality you’re looking for.

These shock absorbers have a unique monotube design that allows the shock to create a larger damping force on impact while effectively controlling body roll during cornering or when driving at high speeds.

This improved handling makes this gadget the perfect choice in suspension systems of both streetcars and racecars alike, but these shocks don’t come pre-assembled, so you’ll have to put them together on your effort.

These shocks use gas pressure technology that provides improved control, stability for ultimate control, and comfortability while driving on any surface or terrain.

Want to improve your car’s handling? Installing these shock absorbers is a breeze. They’re completely bolt-on with no modifications required, so you can get them on your car or truck in just minutes.

If you drive your car a lot, these shock absorbers are the best option for replacing yours. They have an impressive warranty so you can buy them with confidence knowing that they’ll last longer than any other shock absorber you have used in your entire life.

These shocks are a must-have for most drivers because they have an incredible lifetime warranty.


  • Quality Ride
  • Enhance Safety
  • Reduce Fatigue
  • Lifetime Warranty


  • Does not come pre-assembled

5. Bilstein 5100 Lift Shocks

Bilstein 5100 Front

Key Features

  • Increased stability
  • Complete set of 4 shocks
  • Easy to Install

Get the best quality shocks for your truck or SUV with this complete Bilstein 5100 Lift Shocks Kit. By using 2-2.5″ front and 0-1″ rear, you can expect increased stability on all road surfaces as well as better off-roading capabilities.

The unique combination of a higher offset from taller coil springs combined with an adjustable ride height means that these will fit any make or model – even if it’s already lifted to three inches above factory specs.

The two-inch increase in clearance at either end is more than enough to keep stock-sized tires firmly planted on uneven terrain while still allowing full entry into most garages without sacrificing style.

These lift shocks will give you a complete suspension package that is easy to install. This product comes with springs, top plate spacers as well as front sway bar brackets so your car or truck can handle much better than it could before installing this set on parts.

If you are looking for an affordable way to improve your ride quality, then look no further because this item isn’t very expensive at all.

These performance series monotube gas charged high-pressure, nitrogen-filled replacement shocks are perfect for those who love off-roading and exploring new trails with their truck.

These Silverado shocks are ideal if you want just 1 inch of change in total suspension height without affecting the factory load capacity or handling characteristics on your Chevrolet Silverado.

To get a complete set of four shocks, you’ll need to buy two front and rear. The only problem is that these don’t work on Silverado 1500s – they’re for the larger 1550HD models instead.

The high-pressure design of these aluminum shocks for trucks and cars makes them highly durable and corrosion-resistant.

The front shock pair with an extension of 15.7 inches paired with the rear 26.15-inch set offers great stability for any job or adventure you plan to take while out in your car, making it one of our favorites.

Furthermore, this product comes with an easy-to-follow hardware kit to make it even easier for you to assemble.


  • Increased Stability
  • Easy to Install
  • Highly Durable
  • Corrosion Resistant


  • Compatible with only Silverado 1500HD

6. Monroe 58637 best replacement shocks for z71

Monroe 58637

Key Features

  • Full Displaced Valving
  • Fluon Banded Piston
  • Ideal for light trucks

Monroe 58637 is a very popular shock absorber among truck owners. It is the cheapest of all the shocks we tested, but it is also the most durable one. This shock absorber is made of strong chrome steel that has a long life expectancy.

After testing we have found that it has a full displaced valving system that provides smooth dampening performance. The load adjusting feature of this shock absorber makes it easy to fine-tune the suspension according to the driving conditions. This shock absorber also comes with a limited lifetime warranty.

We love how Monroe 58637 has all the features that you need to make your truck or SUV safer and more comfortable to drive. It has the load adjust function which is very important because you can control the performance of the shock absorber by manually adjusting it with a special tool included in the package.

Also, it also has a polyurethane band that prevents it from leaking and maintains its shape even under extreme pressure. This shock absorber for Silverado 1500 4WD includes a heavy-gauge calibrated spring, which provides extra control when operating conditions get more demanding.

If you are looking for a Shock Absorber that can be installed on Dodge Ram, this is the one you should buy. It fits all 1500, 2500, 3500, and 5500 series trucks. A properly maintained vehicle requires shocks. They are not just for ride comfort; they are necessary for the safe handling of your vehicle.

Furthermore, by maintaining vertical loads placed upon the tires, shocks help ensure consistent tire-to-road contact. They also help maintain a balanced ride by providing resistance to vehicle bounce, roll and sway as well as brake dive and acceleration squat.


  • Tires maintain maximum traction
  • Strong Chromoly Steel Construction
  • Adjustable height
  • Special modifiers to reduce friction
  • Consistent tire-to-road contact


  • A Little Hard To Get Your Hands-On

7. Skyjacker B8517 Black MAX Shock Absorber


Key Features

  • Advanced Foam-Cell Technology
  • Increased Fluid Capacity for MAX Heat Dissipation
  • Rock Solid Product

The Skyjacker B8517 Black MAX Shock Absorber is an all-season high-performance shock absorber that can handle the abuse your rig suffers on the street or on the highway. It features an advanced foamy cell that provides a soft yet firm ride while improving gas mileage.

We love how this shock has a high fluid capacity to dissipate more heat than other shocks, ensuring that it will last longer between repairs. This is a great all-purpose shock absorber that will handle just about any driving condition you throw at it.

After testing we have found that extra-long valve stems and oversized valve body create a very tight seal which makes this shock absorber the most effective and longest-lasting on the market.

Also, it has a solid construction that will not break easily. As I have noted earlier, having a strong and long-lasting shock absorber is an important factor in maintaining the value of your vehicle. This is one of those products that you get what you pay for and it is very well made.

If you are looking for a quality all-season high-performance shock absorber, look no further. This is a great all-purpose shock absorber that will handle just about any driving condition you throw at it.

Furthermore, it is a good product for Silverado 1500 4WD at a fair price and very easy to install. It comes with a 30-day money-back guarantee and it can be shipped to you immediately by UPS Ground.

Another good thing about Skyjacker B8517 is that no matter where you are located, your order will be delivered to you within 24-hours. The only downside we see with this particular product is that there is not much (if any) technical information available about it. That’s not necessarily a bad thing though, because it allows the manufacturer to keep the details of this product under wraps.


  • Very high quality
  • A great all-purpose shock absorber
  • Great all-purpose high-performance shock absorber
  • Longer lasting than other shocks
  • Solid construction is not likely to break


  • Does Not Have Adjustable Stem
  • May need to be adjusted after installation

What is Shock Absorbers?

Surprisingly, many people don’t know exactly what a shock absorber is. In simple terms, it’s a device that dissipates the impact of a car’s shocks. They work with springs inside the wheel assemblies to cushion the ride and reduce fatigue for the occupants of the vehicle. The shocks for Silverado 1500 are the same as for any other vehicle. 

Things to Consider While Buying Shocks for Silverado 1500 4wd

Best Shocks for Silverado 1500 4wd

There are certain things that any buyer would want to see in the Best Shocks for Silverado 1500 4wd. These include:

High-quality Build

Today’s standard shocks are not the same as those from 20 years ago. Most now come with several high-tech features that greatly enhance their ability to keep you safe on the road as well as boost your car’s handling.

The good ones are built to last for years, while great ones can still be in use after a decade or more. If you pick up a used set of shocks, make sure they were well-maintained and not taken apart (which often ruins them) or damaged (which usually means the shock is done).

High-performance Design

Modern shock absorbers are designed to work seamlessly with your truck’s standard suspension. This allows you to continue using the same springs, bearings, bushings, and other components without having to change them.

Most of today’s shocks for Silverado 1500 4WD models are also low profile or monotube designs which help reduce body roll.

Variety of applications

While there are several shocks on the market today that will fit Chevy Silverado 1500 4WD models, not all of them work with every truck. The original shock was designed for the rear axle, while many after-market or replacement units can be used for either or both ends (front and rear). Make sure your new shock absorbers are designed for both axles.

Wide range of colors

You want to match the color of your shocks with that of your car’s skin or complement the rest of its trim pieces.

If silver is not doing it for you, have a look at other options which include red, blue, black, and yellow. There are also chrome and clear-coated options for those who want a flashier look.


Finally, you need to select the best shock absorbers that fit your budget. While the top-of-the-line units can be twice or three times as expensive as entry-level options, you don’t necessarily get double the performance. What you do get is a unit that should last twice as long and offer more responsive handling.

Component Replacement

Most important of all is the ease with which you can get parts for replacement or repairs in case of wear and tear.

This may seem like a trivial point, but most people cannot afford to be stranded on the road simply because their shock absorbers are not working properly anymore.

Load-Adjusting Feature

What’s that? As a truck driver, chances are you have more than just one person and a few bags of groceries or a load of cargo in your 1500.

You might be going to pick up a dirt bike from the friend who borrowed it or have a car strapped to your truck bed. In both situations, you’ll need shocks that can keep up with the load and allow you to adjust for this change.


You don’t want the shocks you buy not to work with your truck, right? Make sure it is compatible with your Chevy Silverado 1500 4WD before you make the purchase.

Material and Size

The material should be durable and resistant to corrosion and leaks (most are made of aluminum or stainless steel and rubber or polyurethane). Make sure the size is appropriate for your truck (i.e., not too small, or too large).



There are several great alternatives when it comes to Shocks for Silverado 1500, and all the above-mentioned shocks are the Best Shocks for Silverado 1500 4wd but if I had to recommend one, my top choice would be Bilstein 5100 Monotube Gas Shocks.

This shock absorber is great because it has several options, helping improve the performance of your diesel engine truck.

It provides a smooth and safe ride for you to enjoy on any road or path while having optimum safety no matter what kind of load you are always carrying with you.

This product also has an affordable price that will not break your budget as well as a limited lifetime warranty if anything goes wrong during its use.

As a second choice, I would recommend the Bilstein 4600 Series Shock Absorbers since it’s a quite cost-effective and economical product.

It is a great option for those looking to upgrade their car suspension. With some key features such as ensuring a quality ride, enhancing safety, and reducing fatigue, the shock absorber is sure not to disappoint.

Leave a Comment